Dissatisfaction with the speed and power our cars we would have felt too. one way that we can do to get more power or increase power our cars is to replace the standard header or exhaust system.
Replace the standard header or exhaust system is marketed by the manufacturer with a special (aftermarket) - non-car manufacturer - can not do it alone.
Most of the additional power from the exhaust manifold (header) shall be in accordance with the character of the machine. For a simple modification, there are two options, namely 4-1 configuration to obtain large torque, while the 4-2-1 to gain maximum speed. Must also adjust the volume header. If it does not force it melempen.
For cars that have been using 1.5-inch diameter pipe 48 mm or more, no need to replace with a larger size. If a smaller diameter, should be replaced with a measure that has been mentioned earlier and are preferably made of galvanized plate.
Replace the filter
Another aspect also needs to be done is replace the filter exhaust (muffler) to direct the flow aruh atgau straight. The original muffler factory, equipped with a winding insulation to reduce noise caused. This could cause kick back. This is what causes the power of the engine so it is not optimal.
Replacement should also consider the sound produced, ngebass and pleasant. In addition, in order to look attractive, penggerjaan end exhaust tip must be neat.
To replace the exhaust, the funds needed sekiar Rp 2 million. Actual reimbursement depends on the number and type of engine cylinders.
Replace the standard header or exhaust system is marketed by the manufacturer with a special (aftermarket) - non-car manufacturer - can not do it alone.
Most of the additional power from the exhaust manifold (header) shall be in accordance with the character of the machine. For a simple modification, there are two options, namely 4-1 configuration to obtain large torque, while the 4-2-1 to gain maximum speed. Must also adjust the volume header. If it does not force it melempen.
For cars that have been using 1.5-inch diameter pipe 48 mm or more, no need to replace with a larger size. If a smaller diameter, should be replaced with a measure that has been mentioned earlier and are preferably made of galvanized plate.
Replace the filter
Another aspect also needs to be done is replace the filter exhaust (muffler) to direct the flow aruh atgau straight. The original muffler factory, equipped with a winding insulation to reduce noise caused. This could cause kick back. This is what causes the power of the engine so it is not optimal.
Replacement should also consider the sound produced, ngebass and pleasant. In addition, in order to look attractive, penggerjaan end exhaust tip must be neat.
To replace the exhaust, the funds needed sekiar Rp 2 million. Actual reimbursement depends on the number and type of engine cylinders.
Tidak ada komentar:
Posting Komentar